50X25 RHS, Laser Profiles,
40x40 SHS, 125x75x10 Angle,
10mm Clear Toughened Glass
Hand-Distressed Mild Steel
We were commissioned to design, create & install a Glass Balustrade within a refurbished, century-old office Building which would become a plush, modern apartment. Our brief was simply.."industrial looking, with glass". During our visit to the site it became apparent that some difficulties in obtaining a good, solid fix would be the order of the day. However, we did overcome this aspect by simply introducing a solid 125x75x10mm Angle section to which the whole Balustrade would attach and therefor, this enabled us to attach to the walls of the stair opening and into the surrounding supporting joists.
The sheer 'hand made' qualities of this particular work are clear in abundance! The steel sections used were standard hollow sections which we welded, cleaned and tarnished using a variety of tools & methods after which the entire structure was Polyester Powder-Coated in a Clear Lacquer. This gave the finish a warm, toffee looking appearance and above all, will assist in providing an extremely long product life.